What are DSO modules?
"On modern Unix derivatives there exists a nifty mechanism usually called dynamic linking/loading of Dynamic Shared Objects (DSO) which provides a way to build a piece of program code in a special format for loading it at run-time into the address space of an executable program.

This loading can usually be done in two ways: Automatically by a system program called ld.so when an executable program is started, or manually from within the executing program via a programmatic system interface to the Unix loader through the system calls dlopen()/dlsym().

In the first way the DSO's are usually called shared libraries or DSO libraries and named libfoo.so or libfoo.so.1.2. They reside in a system directory (usually /usr/lib/) and the link to the executable program is established at build-time by specifying -lfoo to the linker command. This hard-codes library references into the executable program file so that at start-time the Unix loader is able to locate libfoo.so in /usr/lib/, in paths hard-coded via linker-options like -R or in paths configured via the environment variable LD_LIBRARY_PATH. It then resolves any (yet unresolved) symbols in the executable program which are available in the DSO.

Symbols in the executable program are usually not referenced by the DSO (because it's a reusable library of general code) and hence no further resolving has to be done. The executable program has no need to do anything on its own to use the symbols from the DSO because the complete resolving is done by the Unix loader. (In fact, the code to invoke ld.so is part of the run-time startup code which is linked into every executable program which has been bound non-static.) The advantage of dynamic loading of common library code is obvious: the library code needs to be stored only once, in a system library like libc.so, saving disk space for every program.

In the second way the DSO's are usually called shared objects or DSO files and can be named with an arbitrary extension (although the canonical name is foo.so). These files usually stay inside a program-specific directory and there is no automatically established link to the executable program where they are used. Instead the executable program manually loads the DSO at run-time into its address space via dlopen(). At this time no resolving of symbols from the DSO for the executable program is done. Instead the Unix loader automatically resolves any (yet unresolved) symbols in the DSO from the set of symbols exported by the executable program and its already loaded DSO libraries (especially all symbols from the ubiquitous libc.so). This way the DSO gets knowledge of the executable program's symbol set as if it had been statically linked with it in the first place."

(Taken from http://httpd.apache.org/docs/dso.html)

The mod_dso module is ProFTPD's module for handling the dynamic loading of modules. This module is contained in the mod_dso.c file for ProFTPD 1.3.x, and is not compiled by default. Installation instructions are discussed here.

The most current version of mod_dso can be found in the ProFTPD source distribution:

  http://www.proftpd.org/

Directives

• LoadFile
• LoadModule
• ModuleControlsACLs
• ModuleOrder
• ModulePath

Control Actions

• insmod
• lsmod
• rmmod

LoadFile

The LoadFile directive is used to load any shared object (.so file extension), such as shared libraries. On some platforms, it may be necessary to load all of the libraries needed by a DSO module, using LoadFile, prior to loading the module itself.

The path parameter must be the absolute path to the shared object to load.

Example:

  # Load the zlib library
  LoadFile /usr/lib/libz.so

LoadModule

The LoadModule directive is used to dynamically load a module from the configuration file.

Example:

  LoadModule mod_test.c

ModuleControlsACLs

The ModuleControlsACLs directive configures access lists of users or groups who are allowed (or denied) the ability to use the actions implemented by mod_dso. The default behavior is to deny everyone unless an ACL allowing access has been explicitly configured.

If "allow" is used, then list, a comma-delimited list of users or groups, can use the given actions; all others are denied. If "deny" is used, then the list of users or groups cannot use actions all others are allowed. Multiple ModuleControlsACLs directives may be used to configure ACLs for different control actions, and for both users and groups.

The actions provided by mod_dso are "insmod" "lsmod", and "rmmod".

Example:

  # Allow only user root to load and unload modules, but allow everyone
  # to see which modules have been loaded
  ModuleControlsACLs insmod,rmmod allow user root
  ModuleControlsACLs lsmod allow user *

ModuleOrder

The ModuleOrder directive can be used to explicitly set the module order. Note: do not use this directive unless you know what you are doing. It is very easy to configure a non-working server with this directive.

If you are going to use ModuleOrder, make sure it is the very first directive in your proftpd.conf file.

Example:

  # Make this one the very first things, if you're going to use it.
  ModuleOrder \
    mod_core.c \
    mod_cap.c \
    mod_auth_unix.c \
    mod_auth_pam.c \
    mod_ls.c \
    mod_log.c \
    mod_site.c \
    mod_xfer.c \
    mod_auth.c \
    mod_ifsession.c \
    mod_auth_file.c

ModulePath

The ModulePath directive is used to configure an alternative directory from which mod_dso will load DSO modules. By default, mod_dso uses $prefix/libexec/, where $prefix is where you installed proftpd, e.g. /usr/local/.

The path parameter must be an absolute path.

Example:

  ModulePath /etc/proftpd/libexec

Control Actions

insmod

The insmod control action can be used to load a DSO module into the running proftpd daemon.

A module cannot be loaded multiple times.

Example:

  ftpdctl rmmod mod_test.c
  ftpdctl: 'mod_test.c' loaded

lsmod

The lsmod control action is used to display a list of all loaded modules.

Example:

  ftpdctl lsmod           
  ftpdctl: Loaded Modules:
  ftpdctl:   mod_core.c
  ftpdctl:   mod_xfer.c
  ftpdctl:   mod_auth_unix.c
  ftpdctl:   mod_auth_file.c
  ftpdctl:   mod_auth.c
  ftpdctl:   mod_ls.c
  ftpdctl:   mod_log.c
  ftpdctl:   mod_site.c
  ftpdctl:   mod_dso.c
  ftpdctl:   mod_ctrls.c
  ftpdctl:   mod_auth_pam.c
  ftpdctl:   mod_cap.c

rmmod

The rmmod control action can be used to unload a DSO module from the running proftpd daemon. Note that it is also possible to "unload" one of the staticly-linked modules; this does not remove that module from the process' memory space, but does remove that module from the core engine, such that proftpd will act as if the module is not present.

Example:

  ftpdctl rmmod mod_test.c
  ftpdctl: 'mod_test.c' unloaded

Usage

Installation

  ./configure --enable-dso
  make
  make install