ProFTPD module mod_ctrls



This module is contained in the mod_ctrls.c and mod_ctrls.h files for ProFTPD 1.2, and is not compiled by default. Installation instructions are discussed here.

This module implements the server side of a Unix domain socket, used for communication with a running proftpd daemon. The client used for this communication is ftpdctl, part of the Controls API. See the ftpdctl man page for details on using that program; details on the usage of this module follow the directive descriptions.

The most current version of mod_ctrls can be found at:

  http://www.castaglia.org/proftpd/

Author

Please contact TJ Saunders <tj at castaglia.org> with any questions, concerns, or suggestions regarding this module.

Directives

Control Actions


Directives


ControlsACLs

Syntax: ControlsACLs actions|all allow|deny user|group list
Default: None
Context: server config
Module: mod_ctrls
Compatibility: 1.2.10rc1 and later

The ControlsACLs directive configures access lists of users or groups who are allowed (or denied) the ability to use the actions implemented by mod_ctrls. The default behavior is to deny everyone unless an ACL allowing access has been explicitly configured.

If "allow" is used, then list, a comma-delimited list of users or groups, can use the given actions; all others are denied. If "deny" is used, then the list of users or groups cannot use actions all others are allowed. Multiple ControlsACLs directives may be used to configure ACLs for different control actions, and for both users and groups.


ControlsAuthFreshness

Syntax: ControlsAuthFreshness seconds
Default: ControlsAuthFreshness 10
Context: server config
Module: mod_ctrls
Compatibility: 1.2.10rc1 and later

The ControlsAuthFreshness directive configures the maximum age, in seconds, for the client's end of a connection. If the client-specific file is older than the configured age, the connection is denied.


ControlsEngine

Syntax: ControlsEngine on|off
Default: ControlsEngine on
Context: server config
Module: mod_ctrls
Compatibility: 1.2.10rc1 and later

The ControlsEngine directive enables or disables the mod_ctrls module, and thus the processing of ftpdctl requests.


ControlsInterval

Syntax: ControlsInterval seconds
Default: ControlsInterval 10
Context: server config
Module: mod_ctrls
Compatibility:

The ControlsInterval directives configures the interval at which mod_ctrls will check and handle pending ftpdctl action requests on the Controls socket. seconds must be a positive number.


ControlsLog

Syntax: ControlsLog file
Default: None
Context: server config
Module: mod_ctrls
Compatibility: 1.2.10rc1 and later

The ControlsLog directive configures a file used for logging by mod_ctrls and possibly other Controls modules. The configured file must be an absolute path.


ControlsMaxClients

Syntax: ControlsMaxClients number
Default: ControlsMaxClients 5
Context: server config
Module:
Compatibility:

The ControlsMaxClients directive configures the maximum number of pending client requests that will be handled when mod_ctrls checks the socket. number must be a positive number.


ControlsSocket

Syntax: ControlsSocket file
Default: ControlsSocket var/run/proftpd.sock
Context: server config
Module: mod_ctrls
Compatibility: 1.2.10rc1 and later

The ControlsSocket directive configures the file to be used as the Unix domain socket, rather than the default. file must be an absolute path. Note that if used, ftpdctl's -s option will also need to be used.


ControlsSocketACL

Syntax: ControlsSocketACL allow|deny user|group list
Default: None
Context: server config
Module: mod_ctrls
Compatibility: 1.2.10rc1 and later

The ControlsSocketACL directive configures an access list of users or groups who are allowed (or denied) access to the Unix domain server socket used for receiving action requests. The default behavior is to deny everyone unless an ACL allowing access has been explicitly configured.

If "allow" is used, then list, a comma-delimited list of users or groups, can use the control socket; all others are denied. If "deny" is used, then the list of users or groups cannot use the control socket; all others are allowed. A ControlsSocketACL directive with "user" and one using "group" may be used simultaneously.


ControlsSocketOwner

Syntax: ControlsSocketOwner user group
Default: ControlsSocketOwner root root
Context: server config
Module: mod_ctrls
Compatibility: 1.2.10rc1 and later

The ControlsSocketOwner directive configures the ownership of the Unix domain socket file created when mod_ctrls starts up. The ownership of this file (and its mode) can also be used as a form of access control.


Control Actions


help

Syntax: ftpdctl help
Purpose: Display a sorted list of active controls and their descriptions

The help control action can be used to obtain a sorted list of all active control actions, and their descriptions.


insctrl

Syntax: ftpdctl insctrl action|all [module]
Purpose: Enable control actions

The insctrl control action can be used to enable any disabled control action by name. The special "insctrl all" enables all disabled control actions. Once a specific action has been enabled (most control actions are enabled by default) , the "rmctrl" control action can be used to disable it.

Example:

  ftpdctl insctrl debug


lsctrl

Syntax: ftpdctl lsctrl
Purpose: Display a sorted list of all active control actions

The lsctrl control action can be used obtain a sorted list of all active control actions. The list will include the name of the action as well as the module that implements that action.


rmctrl

Syntax: ftpdctl rmctrl action|all [module]
Purpose: Disable control actions

The rmctrl control action can be used to disable any registered control action by name, except for the actions registered by mod_ctrls: "insctrl", "lsctrl", and "rmctrl". The exception to this is the special "rmctrl all", which disables all actions and effectively turns mod_ctrls off. A daemon restart is then necessary to reenable actions. Once a specific action has been disabled, the "insctrl" control action can be used to reenable it.

Example:

  ftpdctl rmctrl memory
This disables all actions registered under the name "memory". If there was such an action registered by a specific module, mod_ctrls_common for example, that the administor wished to disable, but to leave the "memory" actions of other modules enabled:
  ftpdctl rmctrl memory mod_ctrls_common.c


Usage

The determination of "freshness" is part of determining client credentials. The method used by mod_ctrls comes from Stevens' Advanced Programming in the Unix Environment, chapter 15. Admittedly having kernel-provided client credentials would be much nicer, but portably obtaining them is next to impossible. On some flavors of Unix it simply cannot be done. Stevens' method is the next best thing right now.


Installation

The mod_ctrls module is distributed with ProFTPD. To enable use of Controls, use the --enable-ctrls configure option:
  ./configure --enable-ctrls
  make
  make install
This option causes mod_ctrls to be compiled into proftpd.


Author: $Author: castaglia $
Last Updated: $Date: 2004/10/29 16:08:37 $


© Copyright 2000-2002 TJ Saunders
All Rights Reserved