ProFTPD module mod_radius



This module is contained in the mod_radius.c file for ProFTPD 1.2.x, and is not compiled by default. Installation instructions are discussed here.

This module is used to authenticate users using the RADIUS protocol. It can also be used to do logging via RADIUS accounting packets. A more in-depth discussion of the usage of this module follows the configuration directive documentation.

The most current version of mod_radius is distributed with the ProFTPD source code.

Author

Please contact TJ Saunders <tj at castaglia.org> with any questions, concerns, or suggestions regarding this module.

Thanks

2002-06-26: Thanks to Josh Wilsdon <josh at wizard.ca> for correcting a bad assumption in the code that caused data corruption under some circumstances.

2002-12-18: Many thanks to Steffen Clausjuergens <stcl at clausjuergens.de> for helping to track down several bugs with accounting packets.

2003-03-20: Many thanks to Boris Kovalenko <boris at tagnet.ru > for testing many versions of the VSA code.

Directives


RadiusAcctServer

Syntax: RadiusAcctServer server[:port] shared-secret [timeout]
Default: None
Context: server config, <VirtualHost>, <Global>
Module: mod_radius
Compatibility: 1.2.5rc2 and later

The RadiusAcctServer is used to specify a RADIUS server to be used for accounting. The server parameter may be either an IP address or a DNS hostname. If not specified, the port used will be the IANA-registered 1813. The optional timeout parameter is used to tell mod_radius how long to wait for a response from the server; it defaults to 30 seconds.

Multiple RadiusAcctServers may be configured; each will be tried, in order of appearance in the configuration file, until that server times out or mod_radius receives a response.

If no RadiusAcctServers are configured, mod_radius will not use RADIUS for accounting.

See also: RadiusAuthServer


RadiusAuthServer

Syntax: RadiusAuthServer server[:port] shared-secret [timeout]
Default: None
Context: server config, <VirtualHost>, <Global>
Module: mod_radius
Compatibility: 1.2.5rc2 and later

The RadiusAuthServer is used to specify a RADIUS server to be used for authentication. The server parameter may be either an IP address or a DNS hostname. If not specified, the port used will be the IANA-registered 1812. The optional timeout parameter is used to tell mod_radius how long to wait for a response from the server; it defaults to 30 seconds.

Multiple RadiusAuthServers may be configured; each will be tried, in order of appearance in the configuration file, until that server times out or mod_radius receives a response.

If no RadiusAuthServers are configured, mod_radius will not use RADIUS for authentication.

See also: RadiusAcctServer


RadiusEngine

Syntax: RadiusEngine on|off
Default: None
Context: server config, <VirtualHost>, <Global>
Module: mod_radius
Compatibility: 1.2.5rc2 and later

The RadiusEngine directive enables or disables the module's runtime RADIUS engine. If it is set to off this module does no RADIUS authentication or accounting at all. Use this directive to disable the module instead of commenting out all mod_radius directives.


RadiusGroupInfo

Syntax: RadiusGroupInfo primary-group-name suppl-group-names suppl-group-ids
Default: None
Context: server config, <VirtualHost>, <Global>
Module: mod_radius
Compatibility: 1.2.9rc1 and later

The RadiusGroupInfo directive is used to configure group membership information used for every user authenticated via RADIUS. The primary-group-name parameter is used to configure the name that matches the user's GID (which can be configured via the RadiusUserInfo directive). The suppl-group-names and suppl-group-ids parameters are used to specify supplemental group membership for each user; the number of names and IDs must match if these parameters, each a comma-delimited list, are used. As many of ProFTPD's directives can operate based on group names, these textual group names may be important.

In order to support RADIUS servers that may use custom attributes in their Access-Accept response packets to supply user information back to the RADIUS client (mod_radius in this case), this directive allows the following syntax for some of its parameters:

  $(attribute-id:default-value)
where the enclosing $() signals that the parameter is to be supplied by the RADIUS server, attribute-id is the Vendor Specific Attribute (VSA) ID for which to search in the response packet, and default-value is the value to use in case the requested attribute is not present in the response packet. See the RadiusVendor directive description for more information about VSAs.

See Also: RadiusUserInfo, RadiusVendor


RadiusLog

Syntax: RadiusLog file|"none"
Default: None
Context: server config, <VirtualHost>, <Global>
Module: mod_radius
Compatibility: 1.2.5rc2 and later

The RadiusLog directive is used to a specify a log file for mod_radius reporting and debugging, and can be done a per-server basis. The file parameter must be the full path to the file to use for logging. Note that this path must not be to a world-writeable directory and, unless AllowLogSymlinks is explicitly set to on (generally a bad idea), the path must not be a symbolic link.

If file is "none", no logging will be done at all; this setting can be used to override a RadiusLog setting inherited from a <Global> context.


RadiusNASIdentifier

Syntax: RadiusNASIdentifier id
Default: RadiusNASIdentifier ftp
Context: server config, <VirtualHost>, <Global>
Module: mod_radius
Compatibility: 1.3.1rc2 and later

The RadiusNASIdentifier directive configures an NAS identifier string that will be in the constructed RADIUS packets. By default, the NAS identifier is "ftp".

Example:

  RadiusNASIdentifier customID


RadiusRealm

Syntax: RadiusRealm realm
Default: None
Context: server config, <VirtualHost>, <Global>
Module: mod_radius
Compatibility: 1.2.5rc2 and later

The RadiusRealm directive configures a realm string that will be added to the username in the constructed RADIUS packets.

Example:

  RadiusRealm .castaglia.org


RadiusUserInfo

Syntax: RadiusUserInfo uid gid home shell
Default: None
Context: server config, <VirtualHost>, <Global>
Module: mod_radius
Compatibility: 1.2.5rc2 and later

The RadiusUserInfo directive is used to configure login information used for every user authenticated via RADIUS. Group membership information can be configured by using the RadiusGroupInfo directive.

In order to support RADIUS servers that may use custom attributes in their Access-Accept response packets to supply user information back to the RADIUS client (mod_radius in this case), this directive allows the following syntax for some of its parameters:

  $(attribute-id:default-value)
where the enclosing $() signals that the parameter is to be supplied by the RADIUS server, attribute-id is the Vendor Specific Attribute (VSA) ID for which to search in the response packet, and default-value is the value to use in case the requested attribute is not present in the response packet. See the RadiusVendor directive description for more information about VSAs.

If RadiusUserInfo is not used, mod_radius will perform pure "yes/no" authentication only, in the style of PAM. The information that would have been configured via this directive will be pulled from other sources (e.g. /etc/passwd, AuthUserFiles, MySQL tables, etc).

See Also: RadiusGroupInfo, RadiusVendor


RadiusVendor

Syntax: RadiusVendor name id
Default: RadiusVendor Unix 4
Context: server config, <VirtualHost>, <Global>
Module: mod_radius
Compatibility: 1.2.9rc1 and later

The RadiusVendor directive is used to configure the vendor name and ID for which mod_radius will search when it looks for vendor-specific attributes in RADIUS response packets.

Earlier versions of mod_radius could be configured to look up custom RADIUS attributes by normal RADIUS attribute type IDs. However, those normal IDs can only be from 0 to 255, putting a limit on the number of such custom attributes. Fortunately, the RADIUS RFCs define a specific attribute ID, 26, for vendor-specific attributes. The values for such attributes contains an ID for the specific vendor, and then the vendor-specific attribute. The vendor IDs come from the IANA's enterprise numbers hierarchy:

  http://www.iana.org/assignments/enterprise-numbers

By default, mod_radius will look for a vendor ID of 4 (Unix); this configuration directive is used to tell mod_radius to expect a different vendor.


Usage

Strong authentication is in demand for Internet services. For many, this means using the RADIUS (Remote Authentication Dial-In User Service) protocol.

However, there are caveats to using RADIUS for authentication. RADIUS packets are sent in the clear, which means that they can easily be sniffed. First, do not have your authenticating RADIUS servers exposed to the Internet; keep them protected within your LAN. Second, it is highly recommended to use separate RADIUS servers for each of your services.

RADIUS Authentication
The RADIUS protocol can be used for answering the question "Should this user be allowed to login?" However, the "yes/no" answer is not everything that proftpd needs to log a user in; the server also requires the UID and GID to use for the authenticated user, home directory, and shell. This information is usually not available from the RADIUS servers, which means that using RADIUS to provide all the necessary login information can be problematic. The RadiusUserInfo directive is meant to be used to address this issue, to provide the missing information.

In those cases where the RADIUS servers can provide that additional login information, via custom attributes, the RadiusUserInfo directive can also be used obtain that information as well.

RADIUS Accounting
While RADIUS is primarily used for authentication, the protocol also allows for accounting of user activities. The mod_radius module makes use of this ability, using RADIUS accounting packets to transmit the following data:

Merely configuring a RadiusAcctServer enables the module's accounting capabilities.

Common Attributes
The following RADIUS attributes are sent with every RADIUS packet generated by mod_radius:


Installation

The mod_radius module is distributed with ProFTPD. Simply follow the normal steps for using third-party modules in proftpd:
  ./configure --with-modules=mod_radius
  make
  make install



Author: $Author: castaglia $
Last Updated: $Date: 2006/12/13 22:54:47 $


© Copyright 2000-2005 TJ Saunders
All Rights Reserved